High pressure vessel is specially designed for membrane separation applications ,especially for sea water desalination.
Mae'r cynnyrch ar gael yn y porthladd diwedd a'r porthladd ochr; graddiad pwysedd o 1000 psi i 1200 psi a hyd o 1 i 7 elfen bilen.
Mae ansawdd y cynnyrch yn cwrdd â safon ryngwladol fel ASME, NSF.
Nodweddion:
‐ Smooth inner surface finishing for easy loading and unloading of membrane elements
‐ Both end port and side port are available
‐ Different size of side port connection is available in side port vessels
‐ Outer polyurethane paint for UV resistant
‐ Head seal area is formed on the mandrel surface, therefore more accurate.
‐ The head seal is captured and does roll during installation of head assembly
‐ Down‐stream conical shape thrust cone improve water flow pattern and allow installation of head assembly in any angle
‐ ISO9001:200 certification
‐ 100 percent hydro test at 1.5X operating pressure
Manyleb:
Manylebau: | Porth diwedd | Porthladd ochr |
Gradd pwysau sydd ar gael (psi) | 1000/1200 | |
Hyd (Nifer yr elfennau) | 1 i 7 | |
Deunydd Cragen | FRP | |
Lliw Cregyn | Gwyn (lliwiau eraill ar gael ar gais) | |
Porth bwydo / gwrthod | 2-6 | |
Maint | 1.5" | 1.5"/2.0"/2.5"/3 |
Cysylltiad | Diwedd rhigol | |
Deunydd | SS316L, (mae Duplex 2205,2507 yn ddewisiadau opsiwn) | |
Treiddio porthladd | ||
Maint | 1" | |
Cysylltiad | Menyw CNPT/BSP | |
Deunydd | ABS | |
cynulliad pen1 | Yn gynwysedig | |
Addasydd2 | cynnwys | |
Strapiau a chyfrwyau | cynnwys | |
Pecynnu3 | Lapio plastig PVC gyda phecyn allanol carton | |
Max. gweithredu Temp | 50 degree (122℉) | |
Nodyn:
‐ Head assembly consists of Retainer lock bars, cast Aluminum bearing plate, ABS seal plate and lock nut, Head seal, permeate port o‐ring.
– 0.125" OD Standard adaptor is provided. Adaptor of different dimension are available on request.
– wooden crate for export packing.
Canllaw archebu
Taflen Data Cynnyrch | |
Enw Cynnyrch: | Llestr pwysedd uchel ar gyfer dihalwyno dŵr môr |
Nifer yr elfen/llestr | 1 i 7 |
Math o bilen: | 8' x 40" spiral wound element |
Data gweithredu: | |
Pwysau gweithredu: | 1000/1200 psi |
Amrediad tymheredd gweithredu: | ‐7 degree to 49 degree |
Treiddio pwysau cefn porthladd: | 125 psi (8.6 bar) Uchafswm. |
Pwysedd Prawf Hydrostatig: | 1.5 X pwysau gweithredu am 20 munud |
Dimensiynau llong: | Cyfeiriwch at Arlunio |
Pwysau net: | Cyfeiriwch at Arlunio |
Porth bwydo/canolbwyntio: | |
Maint y bibell: | 1.5" IPS groove end standard (2.0" and 2.5" available) |
Nifer y porthladd: | 2 fel safon, mae multiport ar gael ar gais |
Deunydd porthladd: | SS316L, (mae Duplex 2205,2507 yn ddewisiadau opsiwn) |
Clocio porthladd ochr: | 0gradd as standard, (90gradd, 180gradd and 270graddclocio ar gael) |
Porth treiddio: | |
Maint y bibell: | 1" FNPT |
Deunydd porthladd: | 30 y cant ABS wedi'i lenwi â gwydr |
Lliw cragen: | Gwyn |
Roedd ategolion yn cynnwys: | |
Strapiau, sgriwiau strap a chyfrwyau 2 set o dan 3 elfen; 3 set ar gyfer 4 i 7 elfen | |
label | 4 ea |
Addasydd | 2ea |
cynulliad pen | 2 set |
Sêl pen | 2 ea |
Adaptor o‐ring seal | 4 ea |
Pacio: | |
Llestr unigol | Lapiad swigen plastig |
Swmp | Crat bren |
Cyswllt:
E-bost:Sara@water-ts.com
Tagiau poblogaidd: llestr pwysedd uchel, Tsieina, cyflenwyr, gweithgynhyrchwyr, ffatri, addasu, prynu, pris, dyfynbris, swmp, ar werth, mewn stoc
